5라인 GFRP 철근 생산 라인
This 5-line production line greatly raises output while keeping precise control. It manufactures standard GFRP rebar steadily for infrastructure and construction projects.
맞춤 설정 가능 옵션
프로젝트 요구에 맞춰 크기, 색상, 표면 마감을 맞춤 제작할 수 있습니다.
공장 직판 가격
자체 공장 직접 생산으로 비용을 절감하실 수 있습니다.
1.5-line GFRP Rebar Production Line Introduction
5-line GFRP Rebar Production Line is a high-efficiency multi-channel automated pultrusion equipment specially designed for mass production of GFRP fiberglass rebars. Adopting five-channel simultaneous molding structure and intelligent servo control system, this production line realizes synchronous continuous production of multiple GFRP rebars at one time. With high output, stable operation and wide applicability, it is the preferred core equipment for medium and large composite material factories to produce corrosion-resistant FRP steel bar products.
2.Key Advantages of Our 5-line GFRP Rebar Production Line
| Core Feature | 설명 |
|---|---|
| Five-channel Simultaneous Production | 5 rebars are molded at the same time, greatly improving daily output and production efficiency. |
| Uniform Synchronous Traction System | Stable and balanced traction force ensures consistent straightness, density and dimensional accuracy of each rebar. |
| Intelligent Constant Temperature Curing System | Multi-zone segmented heating makes resin fully cured, improving the tensile strength and overall quality of finished GFRP rebars. |
| Strong Production Versatility | Supports production of different diameters of fiberglass rebars, adaptable to various construction and reinforcement projects. |
| Energy-saving & Low Consumption Design | Centralized power control reduces invalid energy loss, realizing high-efficiency and low-cost continuous production. |
| Low Failure Rate & Easy Maintenance | Optimized integrated structure simplifies daily inspection and maintenance, effectively reducing production downtime. |
3. 다양한 적용 분야
| 적용 분야 | 세부 사항 |
|---|---|
| Residential Construction | Anti-corrosion reinforcement for foundation, floor and wall of residential buildings |
| Garden Landscape | Reinforcement for backyard pavement, landscape terrace and outdoor ground |
| Municipal Infrastructure | Reinforcement materials for municipal roads, bridges and tunnels |
| Corrosive Industrial Sites | Structural reinforcement for chemical plants and sewage treatment plants |
| Coastal Projects | Anti-rust reinforcement for coastal engineering, wharves and salt-fog areas |
| 특수 공사 | Insulated and non-magnetic reinforcement for railways and airports |
4. 기술 사양
| Parameter Category | Sub-item | Parameter Value |
|---|---|---|
| Model | – | ZSXWJ5 |
| Lines Quantity | – | 5 lines (one out of five) |
| 직경 범위 | – | 4-32mm |
| Roving Rack | Quantity Configured | 2 sets |
| Configuration | 2/300 Roll | |
| Overall Dimension (L×W×H) | 6000×1000×2430mm | |
| Yarn Preheating Unit | Preheating Power | 3kW×2 |
| 온도 범위 | 0-80℃ | |
| Overall Dimensions (L×W×H) | 1500×1000×1375mm | |
| Resin Tank | Resin Tank Capacity | 40L |
| Overall Dimensions (L×W×H) | 2230×1700×1900mm | |
| Winding Device | Winding Speed | 0-40r/min |
| Winding Power | 1.1kW×5 | |
| Number of Units | 5 | |
| Overall Dimensions (L×W×H) | 2250×1700×1900mm | |
| Heating Device | Heating Power | 9kW×5 |
| 온도 범위 | 0-250℃ | |
| Overall Dimensions (L×W×H) | 2250×1700×1900mm | |
| Cooling Device | Cooling System Type | Water Cooling |
| Power | 200W | |
| Overall Dimensions (L×W×H) | 2250×1600×1300mm | |
| Traction Unit | Traction Power | 1.5kW×2 |
| Traction Speed | 0-4000mm/min | |
| Overall Dimensions (L×W×H) | 2250×1000×2050mm | |
| Cutting Saw | Cutting Range | 400×60mm |
| Cutting Power | 3kW | |
| Transportation Speed | 20m/min | |
| Material Support Stand (L×W×H) | 2250×1000×1550mm |
5.Why Choose Our 5-line GFRP Rebar Production Line?
Our 5-line GFRP Rebar Production Line adopts mature multi-channel pultrusion technology, with higher production capacity than single/double-line equipment while maintaining stable product quality. We support customized molds and parameter adjustment for different specifications of GFRP rebars. Equipped with professional installation guidance, operational training and complete after-sales technical support, we help customers achieve large-scale, high-efficiency and low-cost FRP rebar production.
문의하기 today to discuss your production plan and get a free quote!
생산 라인
01- 귀사는 무역 회사인가요, 아니면 제조 공장인가요?
저희는 제조업체이자 무역 회사입니다. 자체 공장을 보유하고 있으며 해외 고객에게 양질의 서비스를 제공합니다. 문의를 환영합니다!
02- 귀사 제품에 관심이 있습니다. 무료 샘플을 받을 수 있을까요?
재고가 있는 경우 소량의 샘플을 무료로 제공해 드립니다. 배송비만 부담하시면 됩니다. 무료 샘플 문의를 환영합니다!
03- 배송 기간은 얼마나 걸리나요?
최소 주문 수량 기준으로 보증금 입금 후 10~15일이 소요됩니다. 일반적으로 20피트 컨테이너 분량 주문은 30~35일이 걸립니다. 주문 수량에 따른 자세한 배송 기간을 문의해 주세요.
04- 제품 품질은 어떻게 보장하나요?
당사의 모든 생산 라인과 제품은 ISO 9001:2015 인증을 받았으며 해당 기준을 엄격히 준수합니다. 전문 품질 관리 팀이 상주하며, 포장 작업자는 품질 관리 지침에 따라 포장 전 최종 검사를 진행합니다.
05- 결제 조건은 어떻게 되나요?
기본 결제 방식은 T/T 및 선지급 L/C입니다. 샘플 주문의 경우 웨스턴 유니온, 페이팔, 머니그램, 알리페이, 신용카드도 사용 가능합니다.
06- OEM 제작이 가능한가요?
모든 OEM 주문을 받고 있습니다. 디자인을 보내주시고 문의해 주시면 최대한 빠르게 합리적인 가격을 제안해 드리겠습니다.