5 ライン GFRP 鉄筋製造ライン
This 5-line production line greatly raises output while keeping precise control. It manufactures standard GFRP rebar steadily for infrastructure and construction projects.
カスタマイズ可能オプション
プロジェクトのニーズに合わせてサイズ、色、表面仕上げを調整可能です。
工場直販価格
自社工場からの直産によりコストを削減できます。
1.5-line GFRP Rebar Production Line Introduction
5-line GFRP Rebar Production Line is a high-efficiency multi-channel automated pultrusion equipment specially designed for mass production of GFRP fiberglass rebars. Adopting five-channel simultaneous molding structure and intelligent servo control system, this production line realizes synchronous continuous production of multiple GFRP rebars at one time. With high output, stable operation and wide applicability, it is the preferred core equipment for medium and large composite material factories to produce corrosion-resistant FRP steel bar products.
2.Key Advantages of Our 5-line GFRP Rebar Production Line
| Core Feature | 説明 |
|---|---|
| Five-channel Simultaneous Production | 5 rebars are molded at the same time, greatly improving daily output and production efficiency. |
| Uniform Synchronous Traction System | Stable and balanced traction force ensures consistent straightness, density and dimensional accuracy of each rebar. |
| Intelligent Constant Temperature Curing System | Multi-zone segmented heating makes resin fully cured, improving the tensile strength and overall quality of finished GFRP rebars. |
| Strong Production Versatility | Supports production of different diameters of fiberglass rebars, adaptable to various construction and reinforcement projects. |
| Energy-saving & Low Consumption Design | Centralized power control reduces invalid energy loss, realizing high-efficiency and low-cost continuous production. |
| Low Failure Rate & Easy Maintenance | Optimized integrated structure simplifies daily inspection and maintenance, effectively reducing production downtime. |
3. 幅広い適用シナリオ
| 適用分野 | 詳細 |
|---|---|
| Residential Construction | Anti-corrosion reinforcement for foundation, floor and wall of residential buildings |
| Garden Landscape | Reinforcement for backyard pavement, landscape terrace and outdoor ground |
| Municipal Infrastructure | Reinforcement materials for municipal roads, bridges and tunnels |
| Corrosive Industrial Sites | Structural reinforcement for chemical plants and sewage treatment plants |
| Coastal Projects | Anti-rust reinforcement for coastal engineering, wharves and salt-fog areas |
| 特殊土木工事 | Insulated and non-magnetic reinforcement for railways and airports |
4. 技術仕様
| Parameter Category | Sub-item | Parameter Value |
|---|---|---|
| Model | – | ZSXWJ5 |
| Lines Quantity | – | 5 lines (one out of five) |
| 外径範囲 | – | 4-32mm |
| Roving Rack | Quantity Configured | 2 sets |
| Configuration | 2/300 Roll | |
| Overall Dimension (L×W×H) | 6000×1000×2430mm | |
| Yarn Preheating Unit | Preheating Power | 3kW×2 |
| 温度範囲 | 0-80℃ | |
| Overall Dimensions (L×W×H) | 1500×1000×1375mm | |
| Resin Tank | Resin Tank Capacity | 40L |
| Overall Dimensions (L×W×H) | 2230×1700×1900mm | |
| Winding Device | Winding Speed | 0-40r/min |
| Winding Power | 1.1kW×5 | |
| Number of Units | 5 | |
| Overall Dimensions (L×W×H) | 2250×1700×1900mm | |
| Heating Device | Heating Power | 9kW×5 |
| 温度範囲 | 0-250℃ | |
| Overall Dimensions (L×W×H) | 2250×1700×1900mm | |
| Cooling Device | Cooling System Type | Water Cooling |
| Power | 200W | |
| Overall Dimensions (L×W×H) | 2250×1600×1300mm | |
| Traction Unit | Traction Power | 1.5kW×2 |
| Traction Speed | 0-4000mm/min | |
| Overall Dimensions (L×W×H) | 2250×1000×2050mm | |
| Cutting Saw | Cutting Range | 400×60mm |
| Cutting Power | 3kW | |
| Transportation Speed | 20m/min | |
| Material Support Stand (L×W×H) | 2250×1000×1550mm |
5.Why Choose Our 5-line GFRP Rebar Production Line?
Our 5-line GFRP Rebar Production Line adopts mature multi-channel pultrusion technology, with higher production capacity than single/double-line equipment while maintaining stable product quality. We support customized molds and parameter adjustment for different specifications of GFRP rebars. Equipped with professional installation guidance, operational training and complete after-sales technical support, we help customers achieve large-scale, high-efficiency and low-cost FRP rebar production.
お問い合わせ today to discuss your production plan and get a free quote!
生産ライン
01- 貴社は貿易会社ですか、それとも製造工場ですか？
弊社は製造と貿易を兼ねる企業です。自社工場を保有し、海外のお客様へ充実したサービスを提供しております。お問い合わせをお待ちしております！
02- 貴社の製品に興味があります。無料サンプルを入手できますか？
在庫があれば数点のサンプルを無料で提供可能です。送料のみご負担ください。無料サンプルのお問い合わせをお待ちしております！
03- 納期はどのくらいですか？
最低ロットの場合、入金確認後 10～15 日で出荷いたします。20 フィートコンテナ分のご注文は通常 30～35 日で完了します。ご注文数量に応じた詳細な納期をお問い合わせください。
04- 製品の品質をどのように保証していますか？
当社の生産ライン及び製品は全て ISO 9001:2015 認証を取得し、規格を厳格に遵守しています。専門の品質管理チームを擁し、梱包作業員は品質管理基準に基づき出荷前に最終検査を実施しています。
05- お支払い条件を教えてください。
主なお支払い方法は T/T と一覧払い L/C となります。サンプル注文につきましては、Western Union、Paypal、Moneygram、アリペイ、クレジットカードもご利用いただけます。
06- OEM 生産は可能ですか？
各種 OEM 注文に対応可能です。デザインをご提示の上お問い合わせください。早急に適正な価格をご提案いたします。